High Efficiency Slag Remover C Series

High viscosity, Strong slagging power, High cost performance , No slagging, Suitable for small and


Product Introduction

High efficiency slag remover can be used in ladle, tundish and electric furnace. After being evenly dispersed on the surface of the molten liquid by manual or spray gun, a little agitation can be quickly gathered into a slag shell that is easily separated from the metal solution, and a pure solution can be obtained by removing the slag shell, avoiding slag inclusion and improving the quality of the casting. And do not explode, do not splash, do not stick to the bag, do not hang on the wall. High efficiency slag remover C series, cost-effective, mainly used in black casting.

Product Specification






10-18 mesh



Stainless steel, high manganese steel, alloy steel, investment mold, precision steel casting


18-30 mesh



Ordinary cast steel, carbon steel, general requirements for cast steel parts


30-50 mesh



Ductile iron, gray iron, alloy iron, high precision cast iron


50-70 mesh



Ductile iron, gray iron, continuous casting, low temperature casting


Usage Method

1, when the electric furnace melting, when the metal melting, on the surface of the liquid metal with an appropriate amount of slag removal agent initial slag, and then spread a thin layer to cover the surface of the liquid metal, play the role of heat preservation and slag accumulation, slag stripping before baking;

2. Sprinkle a little slag remover on the surface of the hot metal in the ladle. After slagging, sprinkle a little cover can be poured;

3, the total amount of addition is about 0.1-0.3% of the weight of liquid metal;

☆ Note: Because the boiler temperature and the range of use are not the same, please contact customer service to recommend details to you to help you buy more suitable products.

Packing Specification

20 kg/bag, ton bag