Imcaste > Product > Metallurgy Casting

Perlite Slag Remover S Series

Light weight、Less dosage、No splash

产品信息

Product Introduction

Slag remover is used in casting to remove impurities in molten iron and molten steel.  The specifications of slag remover are mainly 18-30 mesh, 30-50 mesh, 50-80 mesh.  The slag remover is made of high quality perlite sand.Perlite slag remover S series.  Low price, cost-effective, suitable for iron foundry use.


Product Specification

Model

Specification

Capacity

Use

S-2

10-18目

（1.0-2.0mm）

1100-1200kg/m3

Stainless steel, high manganese steel, alloy steel, 

investment mold, precision steel casting

S-3

18-30目

（0.6-1.0mm）

1100-1200kg/m3

Ordinary cast steel, carbon steel, general requirements 

for cast steel parts

S-4

30-50目

（0.3-0.6mm）

1100-1200kg/m3

Ductile iron, gray iron, alloy iron, high precision 

cast iron

S-5

50-70目

（0.21-0.3mm）

1000-1100kg/m3

Ductile iron, gray iron, continuous casting, low 

temperature casting

 

Usage Method

1, when the electric furnace melting, when the metal melting, on the surface of the liquid metal with an appropriate amount of slag removal agent initial slag, and then spread a thin layer to cover the surface of the liquid metal, play the role of heat preservation and slag accumulation, slag stripping before baking;

2. Sprinkle a little slag remover on the surface of the hot metal in the ladle. After slagging, sprinkle a little cover can be poured;

3, the total amount of addition is about 0.1-0.3% of the weight of liquid metal;

☆ Note: Because the boiler temperature and the range of use are not the same, please contact customer service to recommend details to you to help you buy more suitable products.


Packing Specification

20 kg/bag, ton bag


 

 

 

 

 

 

 

 


相关产品